Hes power Anti-limescale-750ml

HES Power Anti-Limescale/Lime Solvent

It is an acidic cleaner designed to remove mineral deposits (limescale, rust, and soap scum), primarily for bathroom and kitchen fixtures.

Here are the typical instructions for how it is used:

🛁 General Usage Instructions (Spray Application)

This method is suitable for taps, sinks, tiles, shower cabins, and toilet exteriors.

1. Preparation: Turn the nozzle to the “ON” or spray position.

2. Application: Spray the product directly onto the area affected by limescale, water marks, or rust.

3. Wait: Allow the product to sit for a short period (usually a few minutes) to let the active ingredients dissolve the limescale. For heavy buildup, you may need to let it sit a little longer, but do not allow it to dry on the surface.

4. Wipe/Scrub: Wipe the area with a sponge or soft cloth. For very stubborn, hardened limescale, you might need to use a non-scratch scouring pad or brush gently.

5. Rinse: Crucially, rinse the treated surface thoroughly with plenty of clean water immediately after cleaning to remove the acidic residue.

6. Dry: For a spotless shine and to prevent new water marks, wipe the surface dry with a clean cloth.

⚠️ Important Safety & Surface Notes

• Test Area: Always test on a small, inconspicuous area first, especially on colored fixtures, synthetic materials, or older surfaces.

• Ventilation: Use in a well-ventilated area, as limescale removers contain acids.

• Protection: Wear rubber gloves and avoid contact with eyes and skin.

• Avoid: DO NOT use this product on acid-sensitive materials such as marble, natural stone, gold-plated fittings, enameled surfaces, damaged chrome, or aluminum.

• NEVER Mix: Never mix this product with other cleaners, especially bleach (chlorine-based products), as this can release dangerous toxic gas